 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SUBMINIATURE SOLID STATE LAMP AM2520YC08 YELLOW Features SUBMINIATURE PACKAGE. WIDE VIEWING ANGLE. YOKE LEAD. LONG LIFE - SOLID STATE RELIABILITY. LOW PACKAGE PROFILE. PACKAGE : 1000PCS / REEL. RoHS COMPLIANT. Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAD1271 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/07/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP:1202000758 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AM2520YC08 YELLOW (GaAsP/GaP) WATER CLEAR 10 Typ. 30 Viewing Angle 2 1/2 20 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Yellow Yellow Yellow Yellow Yellow Yellow Device Typ. 590 588 35 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Yellow 105 30 140 5 -40C To +85C Units mW mA mA V SPEC NO: DSAD1271 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/07/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP:1202000758 Yellow AM2520YC08 SPEC NO: DSAD1271 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/07/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP:1202000758 AM2520YC08 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD1271 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/07/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP:1202000758 |
Price & Availability of AM2520YC08
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |